Pilot filter
G 450 – PN100
Alu filter
KF PN20
Zellen pastfilter
ZGF PN100
Cartridge filter
HPF
PF
KFS
Gas filter
Hot gas filter
Typ HPFH
Pilot filter (G450)
PRESSURE RANGE
Inlet pressure 100bar
maximum differential pressure 100 bar
QUALITY
The filter described in this information leaflet together with the respective positioner fulfils the demands of EN334 in in all respects.
Broschure
Sizing
Maintanance
3 D Model
Alu filter (KF)
The filter inlets are in cast aluminum body. The
number shows the nominal inlet and outlet
diameters of the filters.
In addition to the basic type we can offer further
cartridges with different grade of filtration. This
will be defined by “ / “ sign and an alphabetic
character afterword. Forexample KF-40/F: fine
filter
Broschure
Sizing
Maintanance
3 D Model
Zellen past filter (ZGF)
Cellular Cartridge Filter ZGF / ZGEF
This type of cartridge filter is characterised by its highly compact design. Its dimensions are similar to the traditional cellular cartridge filters that have long been used for PN 16 units.
Thus, HEAT is the only producer to offer filters that combine all the benefits of a “large” cartridge filter with the
advantages of extremely compact dimensions.
Broschure
Sizing
Maintanance
3 D Model
Cartridge filter (HPF)
Cartridge Filter HPF
- Filter as vertical pressure device in welded steel construction
- For high-quality cleaning of gases in reducer stations upstream of gas pressure regulators
- Suitable for natural gas, related combustible gases, hydrogen and non-aggressive gases
- Suitable for up to 30% H2 feed into the gas network
- The compact design allows inline execution
- Stable fine cartridges guarantee high separation rates
- Customised design with free nozzle position, selectable gas rail axis, etc.
- Lower differential pressure due to generous flow cross-sections
- Ease of use for regular pressure equipment monitoring
- Sheath diameter from DN 200, standard equipment with the HEAT energy quick-release fastener
- Swivel arm as standard with the quick-release fasteners and larger container lid
Special version also available for higher pressures and temperatures
- Pressure safety valves, pressure gauges, thermometers
- Drain and vent cocks G1/2″ for gas
- Blanking discs, insulation
- Stainless steel version possible, either entirely or from the cartridge outlet onwards
- Drainage fittings also as automatic devices, level indicators
- Coating systems for special locations
Broschure
Sizing
Maintanance
3 D Model
KFS
The filter inlets are in carbon steel body. The
steel unit is a welded assemblage and has
been furnished with all requisite material
certificates. Acceptance as per EN 10.204 3.1
for pressure and leak-proofing is included as a
standard feature. In addition, acceptance as
per EN 10.204 3.2 may be agreed and
performed. The number shows the nominal inlet
and outlet diameters of the filters.
Technical features:
Medium temperature: 0 °C + 50 °C
Ambient temperature: -20 °C + 80 °C
Filtered medium:
Natural gas or other non-aggressive gas, which
can not condense in operation.
Filter inlet:
Basic type:
T3/2905 and FE2570 marked polypropylene
(VILEDON product type), Zn coated wire
netting
/ F: fine filter, filterpaper product AUTOTRIEB,
marking 942
Layout position:
arbitrary, on that condition that the pollutions
cannot fall back into the inlet port. Flow
direction is signed by arrow on the body.